12028 County Highway B
Chippewa Falls, WI 54729
OEM Service Available
Highest Quality, Best Priced, Heavy Duty Ion Exchange
Towers - Columns
Tired of water washing, Wasting water and disposal problems. Dry Washing is for you then. Its easy, less hassle, safer and low cost to clean your fuel. Most wash media is compostable. Did I mention no water usage and no extra drying of the fuel. Very clean and Environmentally friendly.
All our towers are professionally welded and pressure tested. Our towers are made of heavier, thicker material than others. They are also taller than others to allow for more types of resin. With plenty of room for expansion there is less risk of tower damage to over filling. The 6" diameter towers are 54 inches top screen to bottom screen. 74 inches with tripod stand. Our 12" diameter towers are also taller. They are 76 inches top screen to botton screen. All towers are also top to bottom or bottom to top flow. When you recieve the tower just choose flow direction. These towers are meant to be used, not just looked at. In case of over pressurization due to over filling all screens can be replaced very easily. No cutting or rewelding. Just unbolt the cover, unbolt the screen, replace screen, rebolt, and now your back up and running.
We can even customize your tower for wall mounting. Send us your bracket design and we can add it to your tower.
Towers are not powdercoated. Call for quote.
Some ask, How can you make theses Towers and Processors at such a great price?
Answer: We buy heavier thicker material in bulk to keep the price down. We do not contract out our work and then raise the price. We are the manufacturer.
Made in the USA at Turner Industries, Inc.
We have turnkey packages below.
All towers are up flow or down flow.
This tower will wash your BioDiesel at a maximum rate of 9.5 gallons an hour. The tower is 54" tall, 74" tall with tri-pod. Up or down flow.Fluoroelastomer Gaskets (same as Viton)
Wash your BioDiesel at a maximum rate of 9.5 GPH with DW-R10 Resin. Fluoroelastomer gaskets (same as Viton)
One tower, 21 lbs Resin or one 33 lb bag of BD Zorb ( please specify ), Fittings, Valves, pressure gauge, filter, replacment filter, 50 feet 3/8 ID polyethalene hose and a 9.9 gph metering pump,
Fluoroelastomer gaskets (same as Viton)
Picture above is a close up of fittings and guages.
Two 6" Diameter Dry Wash Towers with one 33 lb bag of BD Zorb for lead tower and 21 lbs resin for lag tower. Fittings, valves, Two pressure gauges, Two filters, Two replacement filters, 50 feet 3/8 ID polyethalene hose and a 9.9 gph metering pump. Fluoroelastomer gaskets (same as Viton)
Please specify what tower you want when ordering.
BD Zorb Tower( wood chip, saw dust tower ) has a 12 inch by 48 inch column. Max of 60 GPH with 66 lbs of BD Zorb
Resin tower will wash your BioDiesel at a maximum rate of 50 gallons an hour. This tower is 76 inches top screen to bottom screen to allow for different types of resins and expansion. 97 inches overall. It has a 44 inch foot print. Up or down flow.
Does not include BD Zorb or Resin.
Call or email for shipping quote.
4500 gallons typical, 6250 max Before media is exhausted
Column is 12 x 48
Holds 66 lbs of BD Zorb
Very heavy duty commercial grade,
Can be an up flow or down flow tower, Just flip the fittings. ( Up flow tower shown and recommended)
Complete kit includes
2 boxes of a special formulated wood chip resin mix called BD Zorb (66 LBS)
Pipe fittings, filter and pressure guage
100 feet of 3/8 id polyethylene hose
Air pump, 4.3 gpm 100 psi.
Tower will also accept Wood chips, Saw Dust
Please call or email for a shipping quote.
Tower comes with 120 lbs of DW-R10 resin. Max rate of 50 GPH. Call or email for shipping quote.
Includes, One 12" diameter tower, 120 lbs resin, air diaphragm pump, fittings, valves, pressure gauge, filter, replacement filter and 50 feet of 3/8 polyethalene hose. Please call for shipping quote.
Includes, Two 12" diameter towers, 240 lbs resin, One air diaphragm pump, fittings, valves, pressure gauge, Two filters, Two replacement filters and 50 feet of 3/8 polyethalene hose. Please call for shipping quote.
By using an Ion Exchange Resin or even wood chips you could completely replace the old water wash purification. A dry wash tower can save you money on extra water bills, water disposal problems and water in your fuel from not being dried properly. The Towers are very simple to operate. Just meter in your BioDiesel at the correct rate and pump into your clean storage or fuel tank. For more info on Dry Wash Resin click here.
All pictures are for reference only.
12028 County Highway B
Chippewa Falls, WI 54729